1. Connect FAN MATE 2 (adjustable fan speed
connector) to the 3-pin connector of a fan as shown in Figure 1.
2. Connect FAN MATE 2 to the 3-pin CPU fan connector of the
mainboard.
3. Turn on the computer after assembly is finished.
4. When the speed control knob is turned fully
counter-clockwise, the fan speed is minimum, and the fan
operates in silent mode. You can select the desired fan speed by
turning the knob.
When booting a computer in which FAN MATE 1 is used with the CPU
fan, an alarm sound may be generated by a system monitoring
program to indicate that the rotation of the CPU fan is slow.
If this happens, you may turn the speed control knob fully
clockwise to increase the fan speed, set 'CPU Fan Detected' to
'Disabled' in the BIOS settings, or set the slowest rotation of
the CPU fan in the system monitoring program to less than or
equal to 1500 RPM.
Some mainboards do not boot if the rotation of the CPU fan is below
a certain number of RPM. If the BIOS settings are updated, Silent
Mode can be used. For more information on updating your BIOS ,
please refer to your mainboard manufacturer's web site.
Zalman Tech provides Noise Prevention (NP) power supplies, CPU
coolers, and case fans, as well as fan-less northbridge coolers and video
card coolers to bring you stable performance into noiseless environment.
1.Please check the allowed wattage of the CPU fan connector
on the motherboard, as well as the rated wattage of the fan to be used.
2. Zalman Tech. Co., Ltd. is not responsible for any damage to systems or
CPUs caused by
using the product outside of its specifications.
3. Do not use FAN MATE 2 with a fan having a start up voltage of more than
5V.
Please check the start up voltage in the specifications of the fan.
4. The specifications of any product may change without prior notice to
improve the performance thereof.
Also Recommended
People who are interested in this product also were interested in the following items:
FAN
RPM Controller
