|
Compatibility: AMD 64 socket 939, 940, and 754 motherboards
*May be adapted for use with Intel P4 socket 478
motherboards
Features:
- Fanless design for low-noise operation
- Proprietary through holes on fins for effiecient ventilation
- Multiple heatpipes for well spread heat around aluminum fins
- Soldered fins to copper base (nickel plated) to make
effective contact
- Light weight and easy installation
120mm Fan Duct
(comes with HR-01-775 heat sink)
Technical Spec.:
Dimension: L110 x W60 x H159.5(mm) Heat sink only
Weight: 525g (heat sink only)
Motherboard Compatibility:
AMD: Athlon64 FX 3200+ (socket 939/940) /Athlon64 3200+ (socket 754) and
above
Intel: Pentium-4 socket 478 up to 3.2 GHz (Require
P4-478 Heatsink Retention Kit )
Proper operational conditions for HR-01:
As is the case with any passive cooler, the normal operating range should
be from low to mid CPU frequency. Premium condition for HR-01 is when your
power supply unit has a 12cm fan placed at the bottom facing the CPU
heatsink. An example would be the
Antec PSU or the
Enermax PSU. As for chassis ventilation, a proper setup would have an
intake fan (8cm or 12cm) in the front and a 12cm exhaust fan in the rear as
in the case of the
Antec Performance series or
the Lian Li V1000 series.
If you plan to operate at high CPU frequency, a 12cm fan is definitely
recommended for the heatsink. For tips on how to install one, you can refer
to this
link* for instruction.
* Specs subject to change without notice |
