The best
Dual Fan power supply
design in the world.
Character: Innovative FRONT & REAR fans for STRAIGHT
THROUGH air flow creating the most aerodynamically efficient cooling! And
you know what, it drives heat away from the CPU, too!
Our design creates a low pressure zone just above the CPU where heat is at
the most. The heat is then driven out of the system by the air flow from
the power supply, and that is why we call it Dual Function Power Supply!
It truly is a vast improvement over the conventional power supply with
rear & top fan.
AC INPUT: 115/230 Vac~
14/7A 60/50Hz
DC OUTPUT :
COLOR
BROWN
RED
WHITE
YELLOW
BLUE
PURPLE
BLACK
GREEN
ORANGE
DC
+3.3V
+5V
-5V
12V
-12V
+5V-SB
COM
PS-ON
PW-OK
OUTPUT
20A
40A
0.5A
17A
1.0A
2.0A
RETURN
REMOTE
P.G.
+3.3V and +5V max Output 240W, Peak Surge Max Output 436W
Features
High efficiency
Low Ripple & Noise
Output over voltage protection
Short circuit protection on all outputs
Reset table power shut down
Approved by UL, TUV, CB & CE
INTERNAL 12 VDE fan
Complies with FCC part 15 subpart J Class B at 115VAC operation & CISPR
22 Class B at 230 VAC operation
100% burn-in under high ambient temperature(50¢J)
Vacuum-impregnated transformer
MTBF:100K hours at 25¢J
100% Hi-pot tested
FULL RANGE
100~240VAC
Input
Characteristics
Voltage: 95-132 VAC or 180-264 VAC switch able
Frequency: 47 Hz TO 63 Hz
Input current: 10 amps maximum/ 115 Vrms,60 Hz. 5 amps maximum /230
Vrms,50Hz.
Specification
Remote ON/OFF Control: The power supply shall accept a logic collector
level which will disable / enable all output voltage (excluding +5V
standby).
Temperature range: operating 0¢J~50¢J, storage -20¢J ~ +80¢J
Temperature coefficient: 0.01% / ¢J
Transient response: output voltage recovers in less than 1 ms max.
following a 25% load change
Hold-up time: 16ms minimum at full load & nominal input voltage
Dielectric withstand: input / output 1800 VAC for 1 second, input to
frame ground 1800VAC for 1 second
Humidity: 5~95% RH
Efficiency: 65% min. 70% typical, at full load
Power good signal: turn-on delay 100 ms to 500 ms
Overload protection: 150% max.
Inrush current: 60A cold , 80A ware at 132 VAC
Over voltage protection: +5V output : 6.5V; +3.3V output: 4.6V;+12V
output: 15.5V
* Detailed
specifications and drawings provided upon request
Also Recommended
People who are interested in this product also were interested in the following items:
