The new NoiseTaker Series is build with nothing in mind
other than performance. Meet and exceed
Intel ATX12V Ver. 1.3
power supply design guide. The very first of its kind to sport a dual
+12V rails that separate unwanted noise interference from your
CPU.
Separate 12V rails Independent 12V rails supply to MB/CPU and drives in order to
provide stable and clean current to noise-sensitive devices, such as:
CPU, add-on cards.Meet UL 240VA safety requirements
Smart fan: After PC shuts down, cooling
fans keep running for at least 2 minutes to effectively cool down parts
and hardware's inside PSU and PC cases. Thus, ensure longer product life
time of power supply and hardware's inside PC case.
ATX 12V V1.3 compatible Support latest P4 and Athlon 64 platforms. For P4 platforms use 865
(Springdale) & 875 (Canterwood) chipset's and even new P4 Prescott and
AMD Athlon 64 or later CPU.
S-ATA connectors Connect your system to the faster S-ATA interface for better
performance.
Manual and automatic fan speed control 8cm & 9cm fans automatically controlled by thermostat plus rheostat
control over 8cm fan. Enable users to keep the balance between cooling
effect and acoustic noise.
Extra Power connector Extra 4-pin power connector provides high-end graphic card with
stable current.
Reliability OCP, UVP, OVP, OLP, OTP, and SCP circuits ensure system well-guarded
from any dangers. Maximize safety for your hardware and valuable data.
Copper-shielding Effectively reduces electro-magnetic interference that might affect
MB and CPU from normal operation. (Valid for models with 370W and higher
total power)
Dual Fan The best cooling method for PC system, and is strongly suggested by
AMD.
Silence Acoustic noise is successfully reduced with two fans giving more
airflow in less rpm and smooth mechanical design of fan guards.
FM & FC functions RPM signal of 8cm exhaust fan is provided; EG xxx AX-VE SFCA/FCA
models allow
MB to on/off control 8cm exhaust fan.
> Specifications
Model: EG701P-VE SFMA, EG475P-VE SFMA, EG425P-VE SFMA,
EG375P-VE SFMA, EG325P-VE SFMA , EG275P-VE SFMA Maximum Power: 600W, 470W, 420W, 370W, 320W, 260W Input Voltage: 95V~135V or 180V~265V (selected by
slide switch) Input Frequency Range: 47Hz~63Hz Input Current: 60A 115V/230V max. during cold start
Hold up time: 17ms at 115VAC or 230VAC, full load Over Voltage Protection: +5V: 5.5V~7.0V;
+3.3V:3.76V~4.3V; +12V & +12V2: 13.4V~15.6V Over Load Protection: 110~160% of max load Over current Protection: +3.3V : 55A (max); +5V: 48A
(max); +12V1 & +12V2: 20A (max) Over Temperature Protection: Operating Ambient
10ºC~40ºC, Storage Ambient -40ºC~70ºC Humidity:
Operating : to 85% relative humidity, non condensing at 25ºC
Storage: to 95% relative humidity, non condensing at 50ºC MTBF: Greater than 100K hours at 70% of full rated
load; 230VAC / 50Hz input; 25ºC ambient EMC: EN55022 Class B, EN61000-4-2 Class B,
EN61000-4-3 Class A, EN61000-4-4 Class B, EN61000-4-5 Class B,
EN61000-4-6 Class A, EN61000-4-8 Class A, EN61000-4-11 Class B, FCC
Part 15 & Part 2, CNS 13438 Class B Safety: Approval UL, cUL, TÜV, CB Dimension: W150 x H86 x D140 (mm)
Also Recommended
People who are interested in this product also were interested in the following items:
