Nexus DampTek

Once again, Nexus brings you the best in the silent market. This revolutionary sound dampening material combines the best in noise absorption and isolation together in a product which is easy to cut, easy to remove, and easy to refit. The combination of the Nexus Damptek sound-absorbing foam layer and noise-isolating barrier layer makes this noise absorption material the best of its kind.
 

Nexus Damptek Features:
Retail Box
3 sheets of DampTek noise absorption material
Each sheet consists of a barrier to isolate the noise and a foam layer to absorb the multiple frequencies.
Size per sheet:	40 x 50 cm / 15.7 x 19.7 inch
Thickness:	7.5 mm (1.5 mm barrier layer and 6 mm foam layer)
Compressible down to approx. 2mm
Easy to cut and shape
Self-adhesive backing
Easy to remove and re-fit
Fire-resistant and self-extinguishing

Foam layer details:

The DampTek foam is a sound-absorbing foam with open cells. It is fabricated on the bases of melamine synthetics and withstands high temperatures and is flame-resistant. The DampTek foam has exceptional sound absorption properties. The foam layer (combined with a barrier backing) is directed to the inside of the computer case.

Excellent sound absorption characteristics

Withstands temperatures of:

• -43 C to +150 C (continuous)
• +200 C (peak)

Self extinguishing according to:

• UL94-HF1
• ASTM E-84
• DIN 4102 B1
• ATS 1000-001 Pass (Airbus Industries)

Color: White

Barrier layer details:

The DampTek barrier layer is a flexible, sound-insulating synthetic sheet made from thermoplastic, unvulcanized rubbers (EVA-copolymers) and mineral fillers. Its high relative mass makes the DampTek barrier layer an excellent isolator of the noise in the PC. The barrier has a self-adhesive backing.

Excellent sound insulation characteristics

Withstands temperatures between:

• -40 C and +80 C

Flame-resistant according to:

• DIN 4102 B2

Specific mass: 2450 kg/m3

Color: anthracite grey

Important notice:

• As with any sound absorption material, be careful not to cover any ventilation holes that are critical to your systems ventilation requirements.
• Do not place the material directly on a heat source.
• Please do not stick any material inside the case in such a way that it can or may inhibit the correct functioning of any internal components, such as fans and moving parts.
• These materials are installed at the installer"s own risk